Hydraulicspneumatics 403 Image 0
Hydraulicspneumatics 403 Image 0
Hydraulicspneumatics 403 Image 0
Hydraulicspneumatics 403 Image 0
Hydraulicspneumatics 403 Image 0

Vacuum lifter

Nov. 20, 2006
VPF-57 compact, below-the-hook vacuum lifter handles cylindrical, nonferrous materials, such as billets, pipe, and castings. It features a suction pad with foam seal. Optional spring-loaded parking stands protect the foam pad when not in use; ...

VPF-57 compact, below-the-hook vacuum lifter handles cylindrical, nonferrous materials, such as billets, pipe, and castings. It features a suction pad with foam seal. Optional spring-loaded parking stands protect the foam pad when not in use; custom pads can handle up to 2000 lb. It is offered in compressed air and electric powered versions.

Anver Corp., (800) 654-3500, www.anver.com

Continue Reading

BOOK 2, CHAPTER 12: Fluid Motor Circuits

March 18, 2009
Table of Contents

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...