Hydraulicspneumatics 446 Image 0
Hydraulicspneumatics 446 Image 0
Hydraulicspneumatics 446 Image 0
Hydraulicspneumatics 446 Image 0
Hydraulicspneumatics 446 Image 0

Magnetostrictive position sensors

April 13, 2006
Temposonics G Series magnetostrictive position sensors are backwardcompatible with existing L-Series and Tempo II Series sensors. Enhanced performance qualities include programming and diagnostic features, increased shock and vibration resistance, ...

Temposonics G Series magnetostrictive position sensors are backwardcompatible with existing L-Series and Tempo II Series sensors. Enhanced performance qualities include programming and diagnostic features, increased shock and vibration resistance, reduced EMI, and better immunity to harsh environments. The sensors operate on standard 24-Vdc or optional 9 to 23-Vdc inputs. Voltage and current outputs are fully adjustable within ±10 Vdc and 0 to 20 mA. All outputs available for stroke lengths to 300 in.

MTS Systems Corp., Sensors Div., (919) 677-0100, www.mtssensors.com

Continue Reading

BOOK 2, CHAPTER 12: Fluid Motor Circuits

March 18, 2009
Table of Contents

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...