• Fluid Power Basics
  • Resources
  • Directory
  • Webinars
  • Digital Edition
  • WISE
  • CAD Models
  • Advertise
    • Hydraulicspneumatics 394 Image
    1. Pneumatics
    2. Air Filters and FRLs

    Pneumatic control FRLs

    Nov. 20, 2006
    Cast aluminum FRLs come in port sizes from 1/8 to 1/2 in. NPT. Regulators maintain accuracy greater than 0.2 psig for air flows to 120 scfm. Filters are rated for 5, 25, and 50 m. Lubricators are safe and long-lasting and offer adjustable drip ...

    Cast aluminum FRLs come in port sizes from 1/8 to 1/2 in. NPT. Regulators maintain accuracy greater than 0.2 psig for air flows to 120 scfm. Filters are rated for 5, 25, and 50 m. Lubricators are safe and long-lasting and offer adjustable drip rates. Combination models are available in 1/8 and 1/4 in. NPT sizes.

    Dwyer Instruments Inc., (219) 879-8000, www.dwyer-inst.com

    Continue Reading

    Motor leakage variations

    Oct. 18, 2006
    affect low-speed performance

    The Impacts of Electrification on Fluid Power Systems

    May 15, 2023
    Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

    Sponsored Recommendations

    7 Key Considerations for Selecting a Medical Pump

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

    How Variable Volume Pumps Work

    Feb. 6, 2024
    Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

    What is a Check Valve and How Does it Work?

    Feb. 6, 2024
    Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

    The Difference Between Calibrated Orifices and Holes

    Feb. 6, 2024
    Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...