Hydraulicspneumatics 398 Image 5
Hydraulicspneumatics 398 Image 5
Hydraulicspneumatics 398 Image 5
Hydraulicspneumatics 398 Image 5
Hydraulicspneumatics 398 Image 5

Hose reels

Aug. 10, 2006
Ultra-and supreme-duty hose reels feature Safety-Reel design, which reduces retraction speed by 80% and prevents dispensing nozzles or air tools from whipping toward the reel. Ultra-duty reels are available for 3/8 and 1/2 in. ID hose in 25-, ...
Ultra-and supreme-duty hose reels feature Safety-Reel design, which reduces retraction speed by 80% and prevents dispensing nozzles or air tools from whipping toward the reel. Ultra-duty reels are available for 3/8 and 1/2 in. ID hose in 25-, 35- and 50-ft lengths; and with maximum ratings to 4000 psi. Supreme-duty reels accommodate 1/4, 3/8, and 1/2 in. ID; 35-, 50-, 75- and 100-ft lengths; and with maximum ratings to 5000 psi.

Ingersoll Rand Industrial Technologies, (800) 376-8665, www.irtools.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...