Gear pumps, motors

Polaris PH gear pumps and motors are built in three pieces with a cast iron body for higher operating parameters and versatility regarding shafts, flanges, ports, and built-in valves.

The possibility to mate the body with the cast-iron covers further reduces noise levels, in addition to increasing strength. They feature displacements from 1.16 in.≥/rev to 2.01 in.≥/ rev (19.09 cc/rev to 33.03 cc/rev) and operate in maximum peak pressure up to 4350 psi (300 bar).

Casappa SpA
(630) 761-0041
http://bit.ly/HP1011Casappa