• Fluid Power Basics
  • Resources
  • Directory
  • Webinars
  • Digital Edition
  • WISE
  • CAD Models
  • Advertise
    • Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 04 01 2009 84099 Airvalvesj 00000056328
    1. Pneumatics
    2. Pneumatic Valves

    Air Valves

    April 8, 2009
    SS250A double diaphragm, 2- and 3- way valves are made from corrosion resistant 316 stainless steel and Viton. They operate in temperatures to 400°F, speeds to 600 cpm, and pressures to 125 psig (NC) and 60 psig (NO). They ...
    SS250A double diaphragm, 2- and 3- way valves are made from corrosion resistant 316 stainless steel and Viton.
    Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 04 01 2009 84099 Airvalvesj 00000056328
    They operate in temperatures to 400°F, speeds to 600 cpm, and pressures to 125 psig (NC) and 60 psig (NO). They offer a short stroke of 0.060 in. O-rings and sliding seals are not required, as they tolerate clean and dry or dirty and wet air.

    Humphrey Products
    (269) 381- 5500
    www.humphrey-products.com

    Continue Reading

    BOOK 2, CHAPTER 12: Fluid Motor Circuits

    March 18, 2009
    Table of Contents

    Motor leakage variations

    Oct. 18, 2006
    affect low-speed performance

    Sponsored Recommendations

    7 Key Considerations for Selecting a Medical Pump

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

    How Variable Volume Pumps Work

    Feb. 6, 2024
    Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

    What is a Check Valve and How Does it Work?

    Feb. 6, 2024
    Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

    The Difference Between Calibrated Orifices and Holes

    Feb. 6, 2024
    Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...