Hydraulicspneumatics 437 Image 4

Multi-axis motion controller

Aug. 10, 2007

RMC150E CPU works with RMC100 series I/O modules. It handles a maximum of eight synchronized axes as well as eight dual-loop position-pressure/force axes and reference axes. Motion interface modules can be mixed and matched in 2-, 4-, 6-, or 8-axis ...

Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 New Product 70121 Prods0103j 00000045818

RMC150E CPU works with RMC100 series I/O modules. It handles a maximum of eight synchronized axes as well as eight dual-loop position-pressure/force axes and reference axes. Motion interface modules can be mixed and matched in 2-, 4-, 6-, or 8-axis configurations. Built-in 10/100 Mbit Ethernet port frees a module slot for expanded discrete I/O. USB port provides programming connection.

Delta Computer Systems Inc., (360) 254-8688, www.deltamotion.com

Continue Reading

Motor leakage variations

Oct. 18, 2006

affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023

Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024

Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024

Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024

Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024

Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...