Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 09 01 2010 86300 Balluff Mic 00000058924

Linear position transducer

Sept. 13, 2010
Micropulse PF-series linear transducer provides accurate, reliable linear position feedback in a sleek, low-profile anodized aluminum housing. It offers scalable, absolute, analog output and stroke lengths up to 180 in and ...

Micropulse PF-series linear transducer provides accurate, reliable linear position feedback in a sleek, low-profile anodized aluminum housing. It offers scalable, absolute, analog output and stroke lengths up to 180 in and a measuring range from 51 to 4572 mm. Non-linearity for strokes less than 500 mm is 200 μm and ±0.04% for strokes greater than 500 mm. It features a bi-color status LED and sliding captive mount for free-floating position magnets.

Balluff Inc., (800) 543-8390, www.balluff.com/us

Continue Reading

BOOK 2, CHAPTER 12: Fluid Motor Circuits

March 18, 2009
Table of Contents

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...