Hydraulicspneumatics 1507 86033vacuumgene00000058650
Hydraulicspneumatics 1507 86033vacuumgene00000058650
Hydraulicspneumatics 1507 86033vacuumgene00000058650
Hydraulicspneumatics 1507 86033vacuumgene00000058650
Hydraulicspneumatics 1507 86033vacuumgene00000058650

Vacuum generators

July 14, 2010
Edited By Mary C. Gannon MFL air-operated vacuum generators are now available in four basic models — two that generate high vacuum levels with high vacuum flow rates and two that generate moderate vacuum levels with high vacuum flow rates and low air ...
MFL air-operated vacuum generators are now available in four basic models — two that generate high vacuum levels with high vacuum flow rates and two that generate moderate vacuum levels with high vacuum flow rates and low air consumption. Maximum vacuum is 27.2 in.-Hg and flow is 19.5 scfm. Operating pressures range from 60 to 75 psig in the four sizes.Air-Vac Engineering, (203) 888-9900, www.airvacpumps.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

Handling vacuum design

Aug. 8, 2007
Material handling applications present interesting challenges for vacuum systems.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...