Compressed air filtration
>>
Extractor/Dryers efficiently remove moisture and contaminants
to improve and extend the life cycle of tools and equipment. Twostage
filters operate most effectively with...
|
| |
Cross-drill plugs
>>
Expansion Rv plugs seal cross-drilled construction
holes. Installation is easy with pneumatically powered
rivet gun that pulls a tapered mandrel through a sleeve
to c...
|
| |
Flared fitting seals
>>
Leak-free seals fit flared fittings of 30°, 37°, and 45°. They
are rated for –65° to 1200° F and available in 304 and 316
stainless steel a...
|
| |
High-strength wear rings
>>
Powerbands are made from a blend of premium
nylon, glass fiber, and PTFE. Their cross-section
tolerances of ±0.001 in. improve alignment and
concentric operation...
|
| |
Hydraulic filters
>>
Triboguard high-performance hydraulic filters use
state-of-the-art hydraulic filtration technology to
protect systems. Polymer pack design enables
long life and is en...
|
| |
Indicating transmitter
>>
Model 121 indicating transmitter provides
a simple, loop-powered 8-28 Vdc twowire
4-20mA signal. It features a -in.
NPT interface with easy-to-wire industrial
term...
|
| |
Industrial shock absorbers
>>
MC 150H3, MC 225H3 and MC 600H3 industrial shock absorbers
decelerate loads, prevent impact damage, improve
product performance,
increase cycle speeds,
and reduce ...
|
| |
Linear position sensors
>>
Temposonics RF-series linear position sensors feature a flexible housing for
short installation envelopes with long-strokes. Pressure pipe option allows
for use in hydra...
|
| |
Load cells
>>
LCR series S-beam load cells offer high accuracy
and a 5-point NIST traceable calibration.
Available in common ranges from 25 to 10,000
lb, they are protected to IP55...
|
| |
LS/HT hydraulic motors
>>
WS family of low-speed/high-torque hydraulic motors
feature flow rates to 76 lpm continuous, torque to 824
N-m continuous, and pressures to 207 bar continuous.
They a...
|
