Search

Article

Modular connectors

Code 61, 62 connectors FEATURES 4-bolt, split-flange type Use in place of welded, threaded pipe fittings Same-sized flange ports Optional porting arrangements available For elbows, run tees, branch tees, crosses...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/TechZone/FittingsCouplin/Article/False/7021/TechZone-FittingsCouplin
Article

Engineered connectors

Engineered connectors feature one-piece construction (no brazing). Bar stock construction allows a full wrench pad, required for installation in tight spaces. High tensile strength and hardness allow for high-pressure holding capacity. The...
Apr. 3, 2005 | http://hydraulicspneumatics.com/other-technologies/engineered-connectors
Article

Mini proximity sensors

Two lines of miniature inductive sensors target automation equipment with limited mounting space. The IT line are 6.5 mm in diameter and have smooth bodies that measure 30-mm long. The IE line are 8 mm in diameter with 30-mm threaded body...
Apr. 3, 2005 | http://hydraulicspneumatics.com/other-technologies/mini-proximity-sensors
Article

Vacuum inlet traps

PosiTrap vacuum inlet traps remove corrosive and abrasive particles from the vacuum stream of pumps rated 50 cfm. Feature quick-release clamps and replaceable filter elements. Positively sealed to prevent blow-by. Filter elements include...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/TechZone/Vacuum/Article/False/7083/TechZone-Vacuum
Article

Differential pressure switch

An insert-type differential pressure switch is available for hydraulic filter monitoring. The basic design comes with four differential pressure settings and screws into a 3 /4-16 boss in a filter head. The single-wire design is suitable for...
Apr. 3, 2005 | http://hydraulicspneumatics.com/other-technologies/differential-pressure-switch
Article

Lightweight pumps

TDS hydraulic pumps use a variable displacement, axial piston design, and come in three displacement sizes: 10, 13, and 18 cc/rev. They are rated for input speeds from 600 to 3,600 rpm and provide flows to 17.1 gpm (64.8 lpm). Features include...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/TechZone/HydraulicPumpsM/Article/False/7053/TechZone-HydraulicPumpsM
Article

One-piece V-cup seal

Redesigned one-piece V-cup seals provide long seal life, as well as less manufacturing and assembly. Used in outboard motor fuel assemblies, the seals are made of a special, fuel-resistant fluoroelastomer material that can withstand the harshness...
Apr. 3, 2005 | http://hydraulicspneumatics.com/other-technologies/one-piece-v-cup-seal
Article

Instrumentation tubing

SPECS Size: 6 to 12 mm FEATURES Insulated, jacketed types Thermoplastic, UV-resistant jacket Protects against galvanic, atmospheric corrosion Stainless steel, copper Meets ASTM A23, A269; DIN 17458; ASTM B68, B75 standards...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/TechZone/HydraulicHoseTu/Article/False/7018/TechZone-HydraulicHoseTu
Article

Compressed-air dryers

Dryer for compressed air removes moisture at the point of use. Designed for continuous operation, the dryer uses a molecular sieve in a desiccant cartridge. Each cartridge alternates between a cycle of air drying and regeneration. Desiccant life...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/IndZone/Packaging/Article/False/7073/IndZone-Packaging
Article

Brass fittings

26 Series fittings SPECSSize:1/4 in. to 3/4 in. FEATURES Lightweight, one-piece Easy-to-crimp permanent connection Available in multiple configurations Corrosion-resistant Parker Hannifin Corp., Hose...
Apr. 3, 2005 | http://hydraulicspneumatics.com/200/TechZone/FittingsCouplin/Article/False/7029/TechZone-FittingsCouplin
Hydraulics Pneumatics Blogs

Hydraulics & Pneumatics Bookstore

Our online bookstore features most of the industry’s most popular and classic technical training books available.  

Click below to browse the bookshelves today!

Follow Us

Sponsored Introduction Continue on to (or wait seconds) ×