Hydraulicspneumatics 2169 3
Hydraulicspneumatics 2169 3
Hydraulicspneumatics 2169 3
Hydraulicspneumatics 2169 3
Hydraulicspneumatics 2169 3

Learning from troubleshooting

July 25, 2014
If you like our monthly Troubleshooting Challenge, you should love this.

I enjoy editing Troubleshooting Challenge every month for Hydraulics & Pneumatics. Flud power expert Bob Sheaf sends me a problem and solution each month from his real-life experiences, and we publish each problem every month in the magazine and on our website.

But LinkedIn buddy Kurshed Irani recently shared his own Troubleshooting Challenge he found on a web page for InsaneHydraulics.com, so I thought I would share it  because it has a valuable lesson. Just click here to see the problem and solution.

About the Author

Alan Hitchcox Blog | Editor in Chief

Alan joined Hydraulics & Pneumatics in 1987 with experience as a technical magazine editor and in industrial sales. He graduated with a BS in engineering technology from Franklin University and has also worked as a mechanic and service coordinator. He has taken technical courses in fluid power and electronic and digital control at the Milwaukee School of Engineering and the University of Wisconsin and has served on numerous industry committees.

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...