More in Controls & Instrumentation

MTS Sensors, the market leader for in-cylinder magnetostrictive linear position sensors, has released the next generation of Model MH sensors to provide their customers with even more value to solve their equipment automation requirements. Added protection features and safety options allow the sensors’ use in IEC 61508 SIL-2 and EN 13849-1 PL-d applications. Visit www.mtssensors.com for more details....More

Heise precision pressure instruments provide the high accuracy measurements required for critical test, calibration and process applications....More

WB12 series of Positape tape extension position sensors extends sensor life in applications that require pulleys. It provides a measuring range of 118 in and a linearity of ±0.05% full scale. It is constructed with a custom designed stainless steel tape which is coiled on a precision drum. Housing is IP67 (IP69K) rated with the appropriate mating connector....More

AST46HA series of explosion-proof pressure transmitters offer extended pressure ranges up to 20,000 psi, for use in high-pressure offshore applications. Thick diaphragms and silicon strain gauges offer high repeatability. Fail mode indicator option allows users to choose an output signal that rails or drops during a fault condition....More

AP60 digital pressure gauges offer user-programmable pressure units for MPa, kgf/cm2, bar, and psi. Wide viewing angle provides an accurate readout. They are rated for pressures to 1.000 MPa (145 psi) and are suitable for filtered air and non-combustible and non-corrosive gases. They offer repeatability of less than or equal to ±0.2 FS, ±1 digit....More

Micropulse TA12 non-contact linear position transducer features a compact, explosion proof housing. It provides continuous feedback on hydraulically and pneumatically actuated valves. With an IP 68 rating, it is made of 316 stainless-steel housing and a Nitronics 60 stainless-steel cover....More

TD1000 series of high-resolution, digital measurement pressure transducers feature redundant sensing elements. They feature an integrated digital output signal, allowing a pressure or temperature setpoint to be programmed into the transducer resulting in a digital output signal when that threshold is met. They are rated to 6000 psi (690 bar) and operate in temperatures from –40° to 100°C....More

GX-100 gauge has a diaphragm sensor to claim zero bypass of particulates, and comes standard with bottom …-in. NPT connections, and a follower pointer for display of differential pressure at peak flow rates. Stainless-steel 2.5-in. ......More

Model ELA linear transducer uses Hall Effect technology and mounts externally to mobile hydraulic cylinders. They can be used in double-ended cylinders, steering and long-stroke cylinders where gun drilling had previously been cost-prohibitive. They are easily filed replaceable and operate in temperatures from –40° to 105°C. Output ranges include voltage, current, PWM and CanBus. They offer stroke lengths up to 33 ft and resolution from 0.1 to 10 mm....More

DPGM409 pressure gauges are available for gauge, sealed gauge, absolute, compound gauge, vacuum, and barometric pressure ranges from 25 mbar to 245 bar. Core is a micromachined silicon sensor with 0.08% accuracy. User selectable analog output of either 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA is standard; a built-in wireless transmitter is also available....More

Snow plows are familiar winter-time sights in northern climates. But pushing tons of snow off of roadways often is only part of their job. Hills, sharp turns, intersections, and high-traffic areas usually need salt, sand, cinders or other materials to improve vehicle traction for traffic to keep moving....More