Pneumatic Valves

Low-power Isonic V2 direct-acting, solenoid-operated valves are available in normally-open and normally-closed configurations. They can be used to control vacuum and positive pressures at flow rates up to 0.05 CV. Molded from high-performance thermoplastic, they provide heat, impact and moisture resistance. It reduces power consumption by 60%, extending the life of battery-operated equipment and lowering costs....More

Prospector poppet valve has been expanded to operate in extremely low temperatures, from –40°C (–40°F) to 60°C (140°F). Its high flow and short stroke result in fast response times. It is available in air pilot or solenoid pilot design in a wide range of voltages....More

Energy-efficient pneumatic circuit design often involves mounting valves as close as possible to the actuator. Reducing the length of tubing between a valve and actuator ­— and with it the volume of compressed air required for each actuator cycle — can cut compressed air consumption by as much as 20%....More

The piSave sense flow control/check valve for vacuum cups is used for object sensing on flexible handling devices using a centralized vacuum pump. It works in any orientation, even upside down. It is dirt tolerant and increases vacuum flow through the valve when vacuum level decreases, therefore retaining high lifting force in cups that are in contact with product. Valve allows several vacuum cups to miss (or partly miss) sheets/objects and still maintain system vacuum level and offer a fast-release or blowoff....More

Series 503 pneumatic directional control valves with ultra-high flow ratings are designed for automation and piloting applications. They are available in spool-and-sleeve or rubber seal models, and proprietary or ISO versions....More