Hydraulics & Pneumatics
Home > Technologies

Technologies

RSS

Traction and efficiency rule

You can find special-purpose vehicles for almost every task of landscape gardening – from riding lawn mowers to equipment trailers. These vehicles are normally designed for relatively flat and level fields, so an operator confronting a steep slope can pose a real challenge. A solution to this problem is a system similar to auto-leveling systems found in combine harvesters. For mowers, the chassis and mower unit remain parallel to the ground’s surface while the operator pod stays level. The result is safer and more comfortable mowing on slopes.

Read and Discuss

  • Jun. 17, 2013
    blog

    Don't try this at home. . . or anywhere else!

    Don’t try this at home. . . or anywhere else Sometimes you must be resourceful when facing a challenging task, but not at the expense of safety....More
  • Jun. 14, 2013
    blog

    Webinar on implementing ultrasound technology

    This Wednesday, June 19th UE Systems Inc. is hosting a webinar on the ultrasound program implemented at Novozymes. ...More
  • Jun. 13, 2013
    Article
    Hydraulics & Pneumatics

    Pinpoint power-loss problems

    Fluid power technology emphasizes the use of efficiencies as key figures of merit for many products across multiple marketplace segments. Such reasoning is sound, especially with the push to reduce energy consumption. However, efficiency is too simplistic a measure, and dare say, tends to be rather abused....More
  • Jun. 13, 2013
    Article
    Hydraulics & Pneumatics

    Virtual slip rings transmit power or signals across air gaps

    Power Coupling Units (PCUs) can inductively transfer dc signals across air gaps to interface with solenoids, digital or analog sensors, switches, relays, and actuators on rotary indexing tables or moving equipment. Sensor Coupling Units (SCUs) take it a step further — transferring power and data simultaneously to rotating or moving sensors....More
  • Jun. 13, 2013
    Article
    Hydraulics & Pneumatics

    Return-line hose snakes its way to pumps

    A big challenge to designing mobile equipment is finding a place to put all the hydraulic components. Locating cylinders is pretty straightforward, and valves and pumps need to be placed where they are accessible. But reservoirs are often placed anywhere on a machine that has a large enough void. This complicates routing of return lines because standard hydraulic hose may lack the flexibility to bend around obstacles....More
  • Jun. 13, 2013
    Article
    Hydraulics & Pneumatics

    Separator keeps air out of braking systems

    Air or other gases entrapped in hydraulic circuits can cause erratic operation and lead to the formation of foam — which can be especially dangerous in braking systems. In a search for a reliable method to ensure that air would not get into the energy-assisted braking system of its machines, a manufacturer of mobile agricultural equipment found just that....More
  • Jun. 13, 2013
    Article
    Hydraulics & Pneumatics

    Cartridge valves add flexibility to excavators

    Engcon AB, Strömsund, Sweden, is the world’s leading manufacturer of tilt rotators — attachments that are installed between an excavator’s boom and bucket to continuous 360° rotation and ±40° lateral pivoting of the bucket or other end tool. Engcon’s tilt rotators are equipped with a hydraulic motor for rotation and double-acting cylinders for optimized tilting force and even load distribution. Engcon´s tilt rotators can be used on most existing excavators and backhoe loaders within a weight range of 11⁄2 to 32 tons....More
  • Jun. 13, 2013
    Product
    Hydraulics & Pneumatics

    Pressure Switches

    Compact A Series pressure switches feature all-316-stainless-steel construction in weatherproof IP67 enclosure. Precision snap-acting microswitches are fully encased to prevent contact corrosion. SPDT or DPDT switching -- setpoint may be factory set or field adjustable. Pressure ranges: vacuum to 7500 psi. Operating temperature range: -40°C to 100°C....More
  • Jun. 13, 2013
    Product
    Hydraulics & Pneumatics

    Axial-piston pumps

    Compact and quiet A11VO Series 40 axial-piston pumps are offered in five sizes with displacements ranging from 110 to 280 cc. Open-circuit pressure capacities are 350 bar nominal, 420 bar maximum. High power density and efficiency reduce fuel consumption and boost productivity of implement hydraulics on mobile equipment. Universal through-drive combines easily with broad range of other pumps....More
  • Jun. 13, 2013
    Product
    Hydraulics & Pneumatics

    Valve connectors

    Hirschmann GDM-series type A valve connectors are available either with electronic inserts with LED function display and/or circuitry to protect downstream electronics from voltage surges or electromagnetic interference. They facilitate both reliable power supplies and secure data transmission for components such as pressure transducers, temperature sensors, and flow monitors. Both designs have integrated strain relief and comply with UL 2238....More
More
Hot Topics
  1. Automate With Air
  2. Fluid Power Handbook & Directory Digital Edition
View All
New blog posts
Fluid Power Systems Conference coming this November
by Alexis Coffey
Posted 9 hours ago
in Fluid Power Talk
Don't try this at home. . . or anywhere else!
by Alan Hitchcox
Posted 1 day ago
in The Hitch Post
The Grohmann Museum at MSOE
by Michael Ference
Posted 7 hours ago
in Michael Ference's Blog, Publisher of H&P
Pressure Control Valves
by Josh Cosford
Posted 1 week ago
in Fluid Power Tips

Subscribe to the Hydraulics & Pneumatics Newsletter!

Keep up with the latest news with our newsletter

Hydraulics & Pneumatics Bookstore

Our online bookstore features most of the industry’s most popular and classic technical training books available.  

Click below to browse the bookshelves today!

Browse Books
Follow Us
HydraulicsPneumatics.com
Design Engineering Sites
Copyright © 2013 Penton