Young Powertech

This is a complete list of all product releases and articles from Young Powertech Inc...

Young Powertech Inc. , Garnet Valley, Pa., recently created a new partnership with STM, Bologna, Italy, a major manufacturer of mechanical transmission devices, particularly planetary drives and gearboxes. Through the alliance, Young Powertech becomes STM’s exclusive North American partner...

Go-fast boats typically can rip through calm seas at 80 knots or more. Built with a deep V fiberglass hull, these racing boats usually run 30 to 50 ft long and have a narrow beam (width, for you landlubbers) for minimal drag. Oh, and they may be powered by twin engines of 500 hp — that’s each, not...

Series 700 HYD-Drives is a combination of orbital motors and planetary gear reducers. They offer displacements from 41.36 to 341 in./rev3, output torque from 610 to 4960 lb-in. × 100 psi, maximum output torque from 19.883 to 114.080 lb-in. and maximum output speed from 128 to 30 rpm...

YSC series radial piston motors resist cavitation and accommodate freewheeling at high speed and continuous operation. Featuring a compact design, they come in displacements of 40 to 988 cc/rev, with maximum continuous speeds from 300 to 1200 rpm. They are rated for maximum continuous pressure to...

YITM series piston motors come with a roller bearing between the piston and crank, providing high torque efficiency and smooth operation. Hydraulically balanced distributor provides high volumetric efficiency. It is available in 16 frames and...

Edited By Mary C. Gannon Replacement radial piston motors are available for Staffa/Kawasaki, KYB, and Intermot. They offer displacements from 100 to 7000 cc and pressures to 4350 psi. Models include single and 2-speed, tapered and straight, keyed,...

Hydraulic rotary manifolds are designed for the transmission of hydraulic fluid, water, coolants, air and many other fluids. Every manifold can be equipped with an electrical swivel joint. They are available with up to 16 ports, continuous...

Wed, 2012-12-12 (All day) Hydraulics handles the hassle of hauling helicopters Avoiding the down and dirty Piezo valves foster medical mobility Editor's Page The future of fluid power? Industry News AG CONNECT 2013 Young Powertech develops partnership with STM William W. Tulloch Jr., fluid...

YPGC/YPGC-A planetary drives are made of 60% steel, about 35% cast iron and a lower percentage of aluminum, copper, rubber and brass. YPGC planetary gear units are divided into 21 groups that transmit torque to the output shaft ranging from 350 to 500,000 lb-ft. Modular construction permits coupling...